The Perfect Vanity

They say that if you are selling a house, potential buyers are looking primarily at two rooms, the kitchen and the bathroom. Why? Because Traditionally these two rooms are the ones that take the most money to renovate so if buyer likes your bathroom and kitchen as is, you're more likely to make the sale.
Renovating the bathroom may seem like a big chore, but if your fixtures are outdated or are not working like they should it may be time to take a deep breath and reconsider. After all, we do spend quite a bit of time in the bathroom.

Not all bathrooms are created equally. Some and small, some are large and some have things like windows or awkwardly enclosed interior walls that you need to either remove or work around. Luckily there are a lot of different vanities that come in all shapes and sizes. For instance, there is a pedal sink that takes up very little room but gets the job done. It is slim and practical and there is even space underneath for little shelves if you'd like to store items. You can even put in two if you want the two sink look but do not have the room for a huge vanity.

Vanities that incorporate storage are always a great option if you have the room. Now you have somewhere to stash all the extras for the bathroom from towels to shampoo and toilet paper to the hair dryer. Some have drawers and attached cupboards and some are streamlined and act just to hold the sink so you have a lot of leyway with the design and size depending on your needs and wants.

Vanities can go to the floor or hover above it depending on the style. If you are already to flooding for example and are doing a bathroom in the basement, a vanity that sits above the floor can mean less heads if you have a flood since it may not get wet at all. These are more modern, come in a variety of finishes and look quite grand hanging on the wall.

Whatever vanity you choose, the bathroom will get an update and you will love the modern new look that you have created. Simple or fancy, double sink or single, light wood, dark wood and any manner of top, the vanity is something that makes your bathroom stand out!

{ Comments are closed }

To Bidet Or Not To Bidet

Bidets are big in places like Europe and Asia but for many of us in North America they are seen as a luxury or something that we just do not need in an ordinary bathroom. Or do we?

A bidet is a piece of equipment that you use to wash yourself after visiting the toilet. If you think about it, it is something that would be very useful and they do have a variety of benefits too. We have been taught that toilet paper is the way to go. Heck, there are even a few brands of moist toilet paper fashioned after baby wipes that get you even cleaner than regular toilet paper alone, but do we need toilet paper at all? Not with a bidet you do not.

We wash all of the other parts of our body on a daily basis, so why do not we wash 'there' each time we 'go' too? It is better for personal hygiene as it offers a more complete wash and a more thorough clean, eliminating bacteria along the way. It also means you will not have to buy toilet paper anymore, so you're saving money and the environment all at the same time. No paper means that toilet backups and clogs are going to decrease as well – you can give the plunger a break! And it is also a great thing to get kids used to at an early age so they can always maintain a higher level of clean than they can get the traditional way.

It used to be that a bidet was a separate piece of equipment and a lot of bathrooms just are not big enough to have more plumbing and more floor space taken up, but of course, technology has advanced and now you can get a toilet and bidet in one. This is great for those who have mobility issues, those who are pregnant and the youngger ones in the family as it's a one stop shop. No more would you have to get up from one appliance to then get back down on another.

The best thing about the bidets of today is the temperature and flow controls and also the drying features that some have included. Now your toilet can be complete in two steps all while sitting in the same position, allowing you a clean like no other and all without the traditional things like toilet paper getting in the way.

{ Comments are closed }

Make the Most of the Room You Have in the Bathroom for a Sink

When you think about it, small bathroom sinks are able to do what you need. Most people only use them to wash their hands and when they are brushing their teeth. Therefore, you do not need one that is wide or even one that is very deep. If you have a small bathroom, you may decide it is time for some changes.

By going with one of the small bathroom sinks, you can change the vanity set up you have. This would mean more space on the counter for you. Yet you will still have a fully functional sink for your needs. It is an efficient option to consider. Just because it is not set up that way now does not mean there is not a better way for you to change it around!

Completely Change the Look

You can opt to completely change the look if you like! Take a look around at the various small bathroom sinks so you know what is out there. You can get one that is square, round, or oblong. You can get one that is not very deep so you have more room under the sink for storage. The goal should be to make it highly functional, but not to waste space you do not have for the item.

With various vanity options, you can go the distance and completely change things around. Perhaps your vanity does not have any cabinets or shelves, so it is just an area you can not do anything with. You will immediately appreciate all of that extra room for storage and to reduce clutter when you change to a different style of vanity and one of the small bathroom sinks.

Perhaps there is very little room between the toilet and the vanity area. With one of the small bathroom sinks, you can go with a design that is slender compared to the one you already have in place. What a difference this is going to make when you walk in there, when you use the toilet, and when you are cleaning up that area of ​​your home.

Vanity Free

If you do not need much storage, you may decide you would like one that is mounted to the wall. Removing the vanity around it completely means you can have more open space in the bathroom. If you feel it is too closed in, scaling it down to just the bare essentials may be the right plan of action for you to consider.

You may want a round bowl style or one that is longer and thinner in there. They all work to all you to take care of your needs. Therefore, it all comes down to the style you want and how much you wish to spend to make those changes happen!

Cost Effective

You do not have to stress about your budget to make these types of changes to your bathroom. In fact, small bathroom sinks are inexpensive, even those that are well made. You do not have to spend a great deal of money on the vanity for it to fit into either. Compare overall quality on such products, what they are made from, and the price. Then you can make some great decisions!

You can choose to remove your old items and install the new on your own. This takes time but it will save you money for the installation. If you are not sure about the work involved, or you do not have the time, hire someone to do this for you. It is a job they should be able to complete for you in an afternoon. Find an excellent install you can trust, and get a written quote first.

{ Comments are closed }

How to Enhance the Longevity of Your LED TV

You have just bought a brand new LED TV with stunning high definition perfect picture quality. It must have cost you a pretty penny and you would definitely not want to replace it in a few years.

As with all things, TVs also age but as per top LED TV manufacturers in Kerala, there are some steps you can follow to the lengthen the lifespan and efficiency of your Big Box aka LED TV.

Turn off the TV when not in use

Seems like common sense? But, numerous studies have proven that using your TV in moderation can actually strengthen its longevity. For instance, if a television remains ON for 3 hours a day, it easily amounts to over 1,000 hours a year. This absolutely increases the number of hours wasted and also your electricity bill.

The right Brightness and contrast

Adjusting the brightness to a minimum level is vital to enhance the lifespan of the TV. High brightness and contrast levels result in the TV working harder to provide the best experience and this often reduces its longevity.

Despite the fact that you have purchased top LED TV in Kerala, this safeguard is essential for the big box to work for years and years to come.

Voltage Regulator is essential

Power dips and surges have potential to hamper your LED TV to a great extent as the power caps can get damaged. Installing a voltage regulator is the smart choice as it protects the TV from hazards like the lighting in addition to power surges. Furthermore, it helps keep the TV efficient regardless of the fact how many other electronic appliances are in use.

Ventilate

An LED TV consumes power and these results in producing a lot of heat. The heat should be removed using a suitable and effective ventilation system. Make sure that your TV can breathe and during installation choose a suitable location keeping this in mind.

The excess heat could easily cut short your TV's lifespan.

Say no to Dust

High amounts of dust in your space can induce a short circuit and result in permanent damage of the TV. Make sure that your TV is placed in a dust-free and clean space.

Clean your TV safely

Use anti-static cleansers and cloths to clean your TV as it does not fare well with static electricity.

Never soak your TV in any kind of liquid cleaners or water in a bid to clean.

Once you have laid hands on the top LED TV in Kerala make sure that you protect your investment. Following these simple tips would surely help your TV in providing world-class entertainment for years to come.

{ Comments are closed }

Thorens TD 124 Repair and Upgrade Tips

The turntable chassis should be restored. All parts including the motor have to be disassembled and cleaned with specific care. The motor bearing should be cleaned of all the old oil and grease then oiled again with high quality oil especially recommended for this bearing system. At the end of the cleaning and reassembly of the parts, the motor is dramatically less noisy and works more stable. The main platter bearing should be disassembled, cleaned and restored. Several components could be replaced: the thrust bearing plate (may be replaced by a thicker one made of bronze), the paper oil gasket and the bearing bottom plate. The new main platter bearing should be oiled with high quality oil having a viscosity which accommodates a broad temperature band. The result of the bearing restoration is a more stable and smooth rotation, less mechanical noise and a system which is perfectly sealed.

All parts made of rubber (idler wheel, drive belt, rubber decoupling mushrooms, motor suspension dampers) can be meticulously cleaned using only hot water and soap avoiding the use of any solvent which would have altered the elasticity of the rubber. This careful cleaning process allowed us to preserve the old parts. In fact there is no need to replace them as they work just as well as new ones would.

The switch suppressor condenser has to be replaced.

The big and massive flinth with super damping abilities is especially important given the power of the Thorens TD 124 chassis. The best material for the plinth is a birch plywood. 5-6 layers of 21 – 24 mm each can be glued with polyurethane glue which gives additional damping properties to the plinth. I am using following unique procedure: 14 cavities were dug inside of the wood body and filled with a mix of lead balls, sand and glue. This technique adds mass to the structure since holding, dampens parasitic resonances and vibration without losing the natural harmonic richness of analogue instrument. It also balances the weight of the entire player. The plinth can be finished using a Rosewood, Mahogany or any other veneer. to make the plinth looks like a piece of art you can varnish it with 12 successful layers and thoroughly polish using premium surface coatings.

The whole structure has to be transported by spike feet. The spikes enable you to isolate the equipment from external vibrations in the environment.

{ Comments are closed }

Home Theatre Design Basics

If you have an extra room in the house or have a special area in the basement you are not using, you may want to consider using the space for a home theater setup. Having a home theater can be expensive but overtime you will see the savings you are getting by being able to watch your favorite movie without having to go to a movie theater. This alone can save you a hundred dollars or so each month.

Before you do this there is one important thing that you need to do. You need to decide where to place the screen, which could be in the corner of the room, against one wall, or even in the center of the room. It all depends on how large the area is and how many seats you have in the room. You should also make sure that the wires are hidden to avoid anyone tripping over them. For snacks and drinks you could have a small refrigerator and microwave in the room.

Here are some other basics you need to consider when doing a home theater design.

Seating arrangement

This is a very important aspect of the design because they can change the complete style and look of the room along with where the screen will be placed. For the seats you can choose individual chairs, sofas, or a combination of both. Where you place them also matters because you can have seats or sofas that are against the wall or you can also have chairs that recline.

Quality of sound

With your home theater setup you need to check the sound quality or sound system you will be using. The speakers are what makes the difference when listening to the movie. If you want a good quality sound make sure that your acoustics are fixed into place. You can not enjoy the movie if you have poor sound quality. Make sure that you have good quality speakers. One thing that works well with a home theater is using a surround sound system. This type of system can make you feel as if you are in the middle of the action.

Lighting

This is an integral part of the home theater design. It is better if you opt for dimmed light and while watching the movie you could switch off some of the lights to enhance the colors of the movie. If the lights are off you will be able to see even the minutest details. The room should also not have many windows because the light can penetrate through the windows which can take away from the movie. This is why a basement area makes a good place for a home theater setup.

{ Comments are closed }

Benefits Of A Professionally Installed Home Theater Surround Sound System

Nothing provides an immersive aural treatment better than a high-performance digital surround sound system. Ever since home theater packages have been available in the consumer market, they have proved to be a great addition to home entertainment systems.

Often, they are part of a home theater which has been fitted by the end user itself. However, if you're a beginner when it comes to AV technology, there are chances you may not follow the right guidelines during installation. This improper setup can lead to performance issues and even long-term damages to precious audio and video equipment.

A professionally installed sound system can deliver amazing results even from an entry-level sound system. The extra amount spent on a professional surround sound installation delivers its value in the long run.

Optimum speaker placement

Another mistake which end-users can make is the wrong placement and positioning of the speakers. The surround sound experience can be hampered if speakers are not placed the way they are supposedly to be. It is quite common to see people with couches pushed back against the wall and the speakers lined up right in front. Wrong speaker placement is the bane of self-guided surround speaker installations.

It is worthwhile to remember that the whole idea of ​​surround sound is to create an environment where you have an immersive soundscape to match the onscreen visuals. AV professionals know the best way to place the speakers, keeping in mind the acoustics of the room. Many professionals also guide you during the entire installation process, ensuring you get the most of your system.

Installation can be complicated

Depending on the size and model of the system you buy, the installation process can be complicated. The out-of-the-box systems may seem simple, however, the actual integration process can have several challenges. There are numerous technical considerations involved while installing a surround sound in a room.

Although many systems have detailed instruction manuals and installation diagrams, we're all aware that most of us do not even go through them. Connecting wires between the speakers and different sources can be tricky. Handling these problems may be difficult for a person with little or no technical knowledge about the ins and outs of surround sound installations.

Maintain signal integrity

A common occurrence many rookies may not be aware of is static interference or hum. Improper wiring or power supply sources can cause interference in your speakers. This interference leads to severe signal degradation. Furthermore, static or unwanted frequency buzzing can damage precise equipment, especially speaker cones.

The chances of interference are high as there are more than 4 speakers with significant long cable runs. Any interference in the system can ruin the sound experience. This is where a professional AV installer comes in. They are well-equipped to deal with such challenges and remove any avenues for interference. It is the professional's job to ensure optimum utilization of the available equipment.

Future assistance

In most cases, a professionally integrated sound system comes with a guarantee or warranty for a period of 6 months to a year. As an end user, you get the privilege and convenience to call your technician should you face any problems with your speaker system. In many ways, this gives you some assurance for the future in the sense that the professionals are accountable for the quality of installation. As it is a paid service, you can only expect the best, no? This offers complete peace of mind in the long run.

These are some of the benefits of having your surround sound system professionally installed. As you spend your hard-earned money on buying a system, it makes a sense to spending a little more and getting a great sounding surround or home theater system of your dreams.

{ Comments are closed }

Difference Of Analog And Digital TV Antennas

There are numerous shows individuals can watch with their friends and loved ones. However, this joyful activity can be ruined due to poor signal. Because of this, it is important for individuals to know their antennas. Today, the most popular TV aerials individuals see in their neighborhood is the analog. These TV aerials can be used indoors and outdoors depending on your location or signal. But, with the advances of technology, more and more individuals are replacing their old TV aerials with digital ones. To know more, below are some of the differences between analog and digital antennas.

Frequencies

One of the main differences of analog and digital TV antennas is its frequency. All televisions relly on frequency in order to obtain signals. However, antennas make use of different frequencies to provide you with optimum viewing experience. As of now, TV signals make use of two types of frequencies. The lower frequency is used by old antennas, meanwhile, the higher frequency is used by digital TV antennas.

Picture Quality

Analog and digital antennas also different in producing pictures for your television. As mentioned above, old antennas make use of lower frequency, which means frequencies can be interfereed that can affect the quality of picture transmitted to your televisions. On the other hand, digital antennas provide better quality since it uses higher frequency which provides better and more stable signal.

Degradation

Another difference of analog and digital TV antennas is the way it degrades on your TV screen. When using old antennas, individuals can still watch shows even with weak signal. However, the quality of the picture can be very poor that causes blurs. On the contrast, when using digital TV aerials, televisions will stop displaying or may turn to black when signals are weak.

Installation

Lastly, these TV aerials also differ in terms of installation. When installing old TV aerials, individuals are required to look for areas that there are no hindrances. Apart from that, antennas must be installed on high areas to receive better signal. As for digital TV antennas, specialists state that installing such device is more complicated since you need to consider numerous factors. For one, individuals need to optimize the antenna's placement. Next, individuals must orient and optimize the antenna itself.

These are only some of the differences between analog and digital TV antennas individuals need to be aware of to ensure that they can use the right TV aerial which can provide better and clearer shows.

{ Comments are closed }

Carrying Out the Best Sound Insulation Testing

Sound insulation testing is an important venture and to be able to carry it out, you need to be accredited by the relevant body. When such testing is carried out, you should be provided with reports that can be submitted to the building control officer. There are parts of the world that require sound testing and state that it has to be carried out in all the new conversions or new building dwellings which create some two adjoining dwellings with floors or separating walls. To make sure that your project goes as smoothly as you want, you should get the sound insulation testing done so as to meet with all the laid out procedures.

What it is

Sound testing is usually carried out so as to make sure that the development actually demonstrates very acceptable airborne as well as impact sound insulation levels as required by the law. So as to make sure that the building remains compliant, you need to do pre-completion testing or to use robust details as you build.

Things that can be tested

It is advisable that you carry out the testing early enough to ensure that you do pass. The walls and the floors that are used for separation are tested so as to determine their amount within the development. This depends on the type and quantity of the dwellings as well as construction method being used for each and every partition.

In case the construction of the separating partition is quite similar and the dwellings are below 10, then the set of sound test will include:

2 impact floor tests

2 airborne floor tests and

2 airborne wall tests

The testing amount can be increased or even reduced. It will all depend on the quantity and type of the dwelling in question. When the development is some terraced homes that are identical for example, you require a single set of the sound tests that compose the airborne wall tests.

When is a building ready for testing?

Before the sound testing is carried out, there is a need to make sure that the building has been completed so as to get the best performance. There is a criterion that can be followed so as to make sure that you have the best chance of passing that sound test and they are:

  • Having ventilation systems installed and well closed
  • Make sure that the external doors and the windows are also installed, closed and even glazed.
  • Have the light switches, the electrical sockets. And the skirting boards all fitted
  • Complete the ceilings the floors and the walls
  • Hung all the interval doors
  • Do not have noisy operations around the property as its being tested
  • You should have access to the two sides of the partition as they are being tested
  • Do not have any trades working within the lodging as the tests go on.
  • Make sure the rooms where you have testing are tidy and empty
  • So as to test the impact sound, you should not have any kind of cosmetic flooring in place
  • You should have the power of around 240v or 50 HZ in the dwelling.

{ Comments are closed }

TV Wall Mount Installation Mistakes That Homeowners Make

Improving homes can be a stressful and expensive tasks since there are new and more durable items that are sold in the market. For instance, when talking about entertainment, more and more homeowners are replacing their old televisions with newer ones to have better picture quality and other unique features. But, when installing these state-of-the-art TVs, some homeowners make mistakes with regard to TV wall mounts. To know more, below are some of the mistakes you need to be aware of.

Not checking the integrity of walls

One of the mistakes that homeowners do when installing TV wall mounts is not checking the integrity of walls. Of course, all homes are made from the best materials to ensure structural reliability. However, there are cases when walls are compromised. Or since, they have created temporary walls to divide their homes. Sadly, some homeowners neglect this factor when installing wall mounts for their televisions.

Not considering the position of the mounts

The next that most homeowners make when installing wall mounts for their televisions is that they do not consider the position of the mounts. As indicated above, more and more homeowners are replacing their old televisions with flat screens, LEDs and smart TVs. So, they have an allocated space for their TV, but this space or location is sometimes not suitable due to its angle. So, it is best to reconsider the location before installing the mounts to avoid unsightly holes on walls.

Using the wrong mounts

There are also cases when some homeowners use the wrong mounts. Most of the time, newly purchase TVs include a mount. But, some of these mounts are not suitable especially if you want to add some features such as the ability to move TVs in different angles. Unfortunately, when buying wall mounts, some homeowners purchase the wrong mounts which can increase their expenses.

Forgetting to measure before installing

Some homeowners also forget to measure before installing wall mounts. This is also one of the most common problems that can affect the integrity of installation as well as viewing experience of individuals. To avoid this, it is essential to measure twice before cutting or drilling holes.

Failing to hide wires

When installing wall mounts for televisions, some homeowners also fail to hide wires. Not hiding wires connect affect the reception of TVs. However, it can definitely damage the aesthetic features of homes. Because of this, it is best for homeowners to run wires behind walls. This may be an extended task, but it can make homes more appealing at the same time.

Neglecting professional assistance

Finally, some homeowners also neglect professional assistance. Installing TV wall mounts can be an easy task. But, there are some problems that can turn simple installation into a disaster. So, if you want to ensure better and more efficient installations, you need to work with professionals.

These are only some of the mistakes that homeowners make when installing TV wall mounts that can affect the looks and appeal of their homes.

{ Comments are closed }

TV Wall Mounting Mistakes Homeowners Make

There are numerous designs that make use of to make homes appealing. For instances, when designing interiors of your homes, you can use neglected spaces like walls. For instance, homeowners can install cabinets and even shelves on walls. Other than that, homeowners can also mount their TVs in walls.

When mounting TVs in walls, there are some homeowners who make mistakes that make such task stressful. To avoid this, below are some of the most common mounting mistakes you need to be aware of.

Failing to check wall reliability

One of the most common mistakes that homeowners make when mounting a television in walls is that they fail to check the reliability of the wall. Most walls are created from durable materials like wood and concrete. However, there are cases when these walls can be damaged due to the extreme weather condition in your location or sometimes improper wall installation. Because of this, mounting a TV in your wall can be dangerous. So, it is best to check your walls first before mounting your TV.

Neglecting TV position

The next mistake that most homeowners make when mounting TVs in walls is that they neglect its position. Surely, homeowners have the ability to move their fixtures wherever they want. But, when you have installed mounts, the fixture or appliance is positioned in that place permanently. Because of this, you need to make sure to choose the right location. In this way, you can make sure that you can watch properly and comfortably.

Using the wrong mounting tools and equipment

There are also some homeowners who make use of the wrong mounting tools and equipment. Most TV mounts are included in the unit. However, there are some cases when you need other types of mounts to position the television properly. Sadly, some homeowners make use of alternative tools which can compromise its reliability. Meanwhile, there are also some homeowners who make use of the wrong equipment when installing mounts. As a result, they require more time and effort to install mounts. Plus, there are cases when TV mounts can be damaged. Thus, it is best to use the right tools and equipment to help you mount your TV in walls.

Not opting for expert help

Of course, mounting TVs in walls seems to be an easy task, but not everyone can do the job properly. But, if you wish to ensure that you mount your TV in walls properly and safely, it is best to opt for reliable experts. These experts have the right tools and equipment to complete the job. Not to mention, some experts event offer warranties.

These are only some of the mistakes that homeowners need to be aware of when mounting TVs in walls.

{ Comments are closed }

5 Ways To Measure Noise At Work

Do you have a day job? Do you work in a noisy environment? If so, you may want to measure the noise level in your workplace. As a general rule, if you have to shout to your colleague who is just 6 feet from you, know that the noise level is too high. In other words, the noise level should not be higher than 85dB. Noise level higher than this is not good for your hearing. Given below are 5 methods that can help you measure noise level in your workplace.

1. Sound Level Meter

You can purchase a sound level meter from the market. With the help of this meter, you will be able to measure the noise level within a few seconds. You can also use an Android app for the same purpose.

2. Field Calibration

For the majority of environmental and occupational noise level monitoring legislation, one requirement is field calibration. Noise measurement equipment like a sound level meter has to be calibrated before and after each use.

For calibration, you may want to use the right acoustic calibrator that can be installed over the mic of the meter. Keep in mind that this part of the meter is fragile and can get damaged due to misuse. If damaged, the meter will give inaccurate measurements.

3. Windshield

This is an important accessory as it cuts down on the influence of the wind while you are taking measurements. Actually, the windshield protects the capsule of the microphone from moisture and acoustic knocks.

4. Stand away from the source of noise

To use a sound level meter, make sure you hold the meter at your arm's length and ear height. Moreover, when taking measurement of the machine noise, we suggest that you stand at least 3 feet away from the machine. Your height should not be more than 1.5 meters. Standing too close to the noise source is not a good idea.

5. Good practice

It's a good idea to ask question to your workers to know working activities and practices in addition to the activity durations. Apart from this, you may want to take notes as to the working position of each worker.

Make sure you allow a few minutes in order to get the right measurement. You should make a note of the measurements given on the screen of the noise meter. Lastly, you may want to use the highest value of the measurements. Make sure you round up the readings. For instance, 83.7dB can be rounded to 84dB.

Too Much Noise

Keep in mind that prolonged exposure to nose may result in permanent damage to our hearing. Therefore, it's important that you the level of damage is based on the noise level as well as the time period you were exposed to the noise.

So, if you have been looking for a way to measure noise level in your workplace, we suggest that you get in touch with a good expert. Hopefully, you will be able to measure and control the noise level.

{ Comments are closed }

Sound Insulation Testing

The purpose of sound testing is to make sure your setup has acceptable level of impact and airborne sound insulation based on the building regulations in your area. You may have to meet the requirements in order to make sure that your building is totally compliant. Let's know more about it.

What is tested?

The number of floors and walls that are going to be tested depends on the type and quality of the building in addition to the construction method. As a matter of fact, the number of tests change based upon the number of buildings as well as the quality of the buildings.

Is your building ready?

Before you hire a sound testing service, we suggest that you make sure that your building is ready for the performance test. In other words, the doors and windows should be installed and closed. The ventilation systems should also be properly installed. Apart from this, the light switches, sockets and skirting boards should also be in place.

Sound testing cost

Most providers offer valuable services for the fees paid. You may want to look for a service provider who gives importance to their clients. The “site fee” includes the reporting, equipment and engineer's fees. Typically, each of the tests is charged separately in order to cut down on your expenses. Moreover, for bulk testing, you can get special discounts. So, the cost will vary on the basis of the number of rooms that you want to get tested.

Failed tests

If a test fails, the company may offer a free of charge re-test or design service. It's important to keep in mind that the engineer may let you know if the test is going to fail. In fact, the tests fail rarely. Experienced acoustic consultants review the buildings and give advice on inexpensive solution so you can achieve the highest standard. Remember: remedial works may cost you a lot of money. Therefore, you may want to get the work done well in first attempt.

Airborne testing

The purpose of an airborne test is to measure the resistance that the sound goes through passing through a floor or wall. Actually, it uses an omni loudspeaker which is put on a side of the wall or floor. This system produces pink noise.

Impact Testing

This is another common type of sound testing. In the impact testing, the tests are done with a tapping machine that looks like a football. And this machine is rested on the top of the rooms and the noise is measured. Then the level measured is corrected based on the reverberation time of the noise in the background as well as the time. This gives an accurate result of the impact sound insulation.

So, if you have been looking for a way to get your building tested for noise levels, we suggest that you hire the services of a good company. This way you can rest assured that your building has the right level of noise. Hopefully, this article gives you the required information.

{ Comments are closed }

5 Tips to Buy a Digital TV Set Top Box

Are you going to benefit from the digital revolution? If so, you may want to read our tips to buy a TV box without any hassle. Now you have digital TV, and you may want to opt for a set top box. As far as the hardware is concerned, you may have some confusion and a few questions as well. Another issue is the compatibility. Actually, this article talks about a few issues that you should know about when buying a TV box.

1. Free vs Pay

The extra tuners from the Foxtel iQ2 are quite attractive; however, you can also go for PVRs that allow you to record free TV. Actually, what you need to do is determine if you are willing to spend around 50 bucks per month in addition to the installation fee for the channels. In other words, if you can pay the installation charges as well as the monthly fee, you can choose this option. Otherwise, you should look for a better option.

2. PVR vs Set Top Box

You also need to consider your usage. If you are looking for a TV box with an intention to enjoy Digital TV, you may want to spend around 50 bucks for an SD TV box. On the other hand, if you are going to do some heavy tasks, such as pausing TV, recording shows, accessing VOD or skipping ads, we suggest that you get ready to pay around $ 700 to get a PVR or a Personal Video Recorder. As a matter of fact, it all boils down to your usage and budget.

3. Ease of Use

As far as ease of use is concerned, you may want to get a good PVR. What you need to do is keep in mind that the product is flexible as well as user-friendly. The device will allow you to watch all of your favorite shows from start to end. However, if you are a gadget freak, you may want to spend a bit more and get a high-end product.

4. Remote scheduling

Do you often forget recording your favorite shows prior to leaving for a dinner at your favorite hotel? If so, we suggest that you consider a device that allows you to remotely schedule records at your convenience. This type of TV box allows you to schedule recordings on a website or your own iPhone.

5. Movie downloads

As far as choosing a PVR goes, you have lots of options. The good news is that almost all PVRs come with an Ethernet port; however, the majority of providers are trying to improve their VOD platforms in order to deliver films through the World Wide Web and air. So, this is another factor that should be considered before buying a good TV box for the first time.

So, if you have been looking for a good TV box, we suggest that you check out the 5 tips given above. Hopefully, you will get your hands on the right product.

{ Comments are closed }

Get Your House With the Best Sound Proofing Now

Are you worried that your neighbors may complain about sound systems and high sound level of your new house? Well, forget it and be a party freak and get yourself moving to beats of music systems just by getting your new house sound insulated. Your house needs sound testing, which may be separated by equal or different distances from your neighbors. You just need to get an expert solution about sound insulation testing in order to get your house sound proof.

What is sound insulation testing?

In simple words sound insulation testing can be defined as minimum separations between the walls, which is required between walls and floors to meet the requirements as stated by Approved Document E generally termed as ADE by UK government. These tests are carried out to ensure that your building construction proves an acceptable level of airborne and impact sound insulation performance. Pre assessment of construction is done and results are provided for desired construction.

Understanding airborne sound and impact

Airborne sound is a sound that is transmitted through air. This sound may be unacceptable in the nearby locality. Here there must be well maintained distance between you and your neighborhood, according to ADE rules and regulation. Well, what is impact, then? Have you ever heard or felt the vibration of DJ and other song. These sounds tend to vibrate the walls of your house this is called impact of sound. Your construction must be in accordance with ADE rules for acceptable sound in the neighborhood.

What is Acoustic test and How to do it?

A poor quality construction and workmanship may cause airborne sound travel directly in between door gaps and windows which may result in flanking sound to the outer environment. Although the element itself provides insulation but still then a small sound from gaps may cause an increase in transmission of airborne sound.

The amount of airborne sound can be reduced by using acoustic absorption. This reduces the amount of sound reflected back to space by the surface enclosing it. This acoustic insulation reduces the sound transmitting into space from an adjacent space though a building fabric. This fabric becomes insulations between walls and air to eliminate air gaps for impact and airborne sound.

Procedure of Acoustic testing:

Some key and important procedures are explained below for efficient acoustic testing:

– Installation of all external construction must be done such as doors, windows, vents etc and doors and windows must be closed.

– Internal doors must be kept open

– All electrical fittings such as lights, fans, switches must be done.

– Make sure that accessibility to both sides of testing walls is done.

– For impact testing there must not be any cosmetic floor fitting

– The testing room must be the one where sound boxes are to be kept in future.

Testing:

Airborne sound transmission can be tested by placing a test loud speaker which must be capable of generating sound at a range of frequencies. Detection of the sound is carried out over a microphone. Later calculations are made and adjustments are made to account for sound absorption from receiving space. These tests are carried out from a range of 125 Hz to 4000Hz.

{ Comments are closed }